Centro de perforación y roscado de alta velocidad JIRFINE T-5A usado - BT30, 20,000 rpm, 2019

[Overview] Used JIRFINE T-5A high-speed drilling and tapping centre, BT30 direct-drive spindle with FANUC CNC, manufactured in October 2019. The T-5A is the high-speed model in JIRFINE's T series for 3C precision machining, featuring a high-rigidity body structure, high-speed servo tool change and high acceleration, suited to volume drilling, tapping and light milling of phone mid-frames, hinges, SIM trays, buttons and other small precision metal parts. Original white paint, complete full-enclosure guarding, control panel and electrical cabinet intact, factory brand and model plates present. [Key Specifications (read from the machine nameplate)] Model T-5A; serial no. T5A02073; date of manufacture October 2019; power supply 3-phase 380 V; power consumption 9.7 kW; manufacturer Dongguan JIR Fine Machinery Industry Co., Ltd. (JIR FINE MACHINERY INDUSTRY CO., LTD.), Chenwubei Village, Changping Town, Dongguan, Guangdong, China. [Standard Factory Configuration (T-5A, for reference)] Travel X/Y/Z 500 × 400 × 300 mm; table 650 × 400 mm (T-slot 14×3×125 mm, max. load 250 kg); spindle 20,000 rpm, BT30 taper, direct drive; spindle motor 5.5 kW; axis servos 2.5 / 2.5 / 2.7 kW; rapid traverse 48 / 48 / 48 m/min; positioning accuracy ±0.005 mm, repeatability ±0.003 mm; arm-type ATC with 16 or 21 tools, tool change approx. 1.4 s; control FANUC 0i-MF; machine weight approx. 3,000 kg. [Delivery & Export] Prices quoted in USD (FOB China US$25,000 for this unit); FOB / CIF / DAP and other Incoterms negotiable. At approximately 3 t and 1,750 × 2,400 × 2,420 mm the machine can be shipped in a 20GP or 40HQ container — no breakbulk or RoRo required. Fumigation-free wooden case or vacuum moisture-barrier packing is recommended to protect the guideways and CNC cabinet. We assist with inland haulage, customs declaration, inspection and export documentation. CE or other destination-country certification requirements should be confirmed before order. The machine is a standard 380 V 3-phase machine (not Japanese 200 V specification); where the destination grid is 400 / 415 / 440 V, please confirm the permissible voltage tolerance. [Inspection] Video inspection and powered test run available (axis movement, spindle running, tool change, alarm history). Third-party inspection can be arranged (spindle radial run-out, table parallelism, positioning and repeatability, ATC operation, operating-time reading from the CNC system). The machine carries a QUIPMAN VERIFIED inspection mark. [Note] Specifications are subject to the actual machine and nameplate; the standard configuration figures are manufacturer-published values, not measurements of this unit; running hours have not been obtained and will be added after reading the FANUC operating-time screen; tool holders, cutting tools, oil cooler and other accessories are subject to the delivery list.