Used Brother TC-S2A CNC Drilling & Tapping Center – BT30, 14-Tool ATC, Made in Japan

[Overview] Used Brother TC-S2A CNC drilling and tapping centre, manufactured in May 2007 in Nagoya, Japan. The TC-S2A uses Brother's characteristic column-traverse architecture with a BT30 spindle, a 14-station turret ATC (approximately 1.1 s tool-to-tool) and Brother's well-known rigid tapping capability, and has long been used for volume drilling, tapping and light milling of electronics housings, connectors, sensor brackets, watch components and medical fasteners. Original cream paint, complete full-enclosure guarding, factory nameplate and front-panel 'brother / TC-S2A' artwork retained; the machine carries a former-owner asset tag (electronics manufacturer) and complete trilingual safety labelling. [Key Specifications (read from the machine nameplate)] Model TC-S2A; serial no. 119141 (light stamping, last three digits uncertain — to be verified against the machine documents); date 2007-05; mass of machine 1,800 kg; power requirements 200 V, 3 phase, 50/60 Hz, rated 9.0 kVA, max. 20.0 kVA; spindle motor rated capacity 7.0 kVA; electrical diagram no. 676660; manufacturer Brother Industries, Ltd. (Nagoya, Japan — MADE IN JAPAN). [Standard Factory Configuration (TC-S2A, for reference)] Travel X/Y/Z 480 × 360 × 270 mm (an alternative published figure of 500 × 400 × 300 mm also exists — to be confirmed against the machine documents); table 600 × 300 mm; BT30 spindle, max. 10,000 rpm; spindle motor 5.5 kW continuous; rapid traverse X/Y 36 m/min, Z 50 m/min; turret ATC, 14 tools, 1.1 s tool-to-tool; Brother CNC control; positioning accuracy ±0.005 mm, repeatability ±0.002 mm; machine weight 1,800 kg. [Delivery & Export] Prices quoted in USD (FOB China US$15,000 for this unit — please refer to the price review before finalising); FOB / CIF / DAP and other Incoterms negotiable. At approximately 1.8 t and 1,600 × 1,800 × 2,360 mm the machine can be shipped in a 20GP or 40HQ container; no breakbulk or RoRo required. Fumigation-free wooden case or vacuum moisture-barrier packing is recommended. We assist with inland haulage, customs declaration, inspection and export documentation. Please note the power supply: this machine is built to the Japanese domestic 200 V 3-phase specification. Where the destination grid is 380 / 400 / 415 / 440 V, a step-down transformer (approximately 15–25 kVA) is required — please confirm before order whether this is included. The machine was built in 2007; some destination countries impose age limits and pre-shipment inspection requirements (e.g. SONCAP, PVoC, SASO) on imported used machinery — please confirm in advance. [Inspection] Video inspection and powered test run available (axis movement, spindle run-up, tool change, alarm history and operating-time reading). Third-party inspection can be arranged (spindle radial and face run-out, table parallelism, positioning and repeatability, ATC operation, rigid tapping test). The machine carries a QUIPMAN VERIFIED inspection mark. [Note] Specifications are subject to the actual machine and nameplate; the standard configuration figures are published values (two alternative datasets exist) and are not measurements of this unit; the serial number suffix and month of manufacture are uncertain and should be verified against the machine documents; tool holders, cutting tools, chip conveyor and other accessories are subject to the delivery list.